classic-car-parts > CLASSIC CAR ELECTRICAL >

SWITCHES

Toggle switch with On/Off Logo plate Ref: CLS01
Double pole switch with bright stainless toggle and On/Off plate; 4 screw terminals for ease of connection; approximately 34mm x 20mm x 28mm deep. requires a 12mm Ø hole and can be fitted to a panel of 4mm maximum thickness. On/Off plate 34mm high x 25mm wide. Requires at least 28mm behind the mounting plate. Rated at 20A @ 12V.
Click here for back view

Price incl.VAT £1.99(€2.37)

Quantity:

Switch On/Off with chrome toggle Ref: CLS0111
25 amp @ 12 volt heavy duty On/Off metal toggle panel switch with silver contacts and Lucar terminals. Requires a 12.5mm mounting hole. Overall size 30mm x 16mm and requires a maximum mounting clearance of 35mm (behind the panel) without the wireing. Maximum panel thickness of 6mm

Price incl.VAT £2.30(€2.74)

Quantity:

Switch On/Off with classic black toggle Ref: CLS0112
20 amp @ 12 volt heavy duty On/Off double pole panel toggle switch with 4 terminals. Requires a 12.5mm mounting hole. Overall size 30mm x 16mm and requires a maximum mounting clearance of 35mm (behind the panel) without the wireing. Maximum panel thickness of 6mm

Price incl.VAT £2.30(€2.74)

Quantity:

Switch Change-over with chrome toggle Ref: CLS01110
25 amp @ 12 volts heavy duty change-over On/On metal toggle panel switch with silver contacts and Lucar terminals. Requires a 12.5mm mounting hole. Overall size 30mm x 16mm and requires a maximum mounting clearance of 35mm (behind the panel) without the wireing. Maximum panel thickness of 6mm. This switch can be used to change from high beam to dipped beam, or to change from one type of horn to a different one, example from a standard horn to a klaxon.

Price incl.VAT £2.30(€2.74)

Quantity:

Switch Indicator type with chrome toggle Ref: CLS01111
25 amp @ 12 volts heavy duty indicator type On/Off/On metal toggle panel switch with silver contacts and Lucar terminals. Requires a 12.5mm mounting hole. Overall size 30mm x 16mm and requires a maximum mounting clearance of 35mm (behind the panel) without the wireing. Maximum panel thickness of 6mm. This switch can be used as a direction indicator switch or selector switch with Off in the middle.

Price incl.VAT £2.30(€2.74)

Quantity:

Switch On/Off (miniature) Ref: CLS012
Switch On/Off: sub-miniature; chrome finish; 2-Terminals. 8x5mm. 7mm Ø.

Price incl.VAT £1.80(€2.14)

Quantity:

Switch On/Off pull/push, short Ref: CLS013
Short neck heavy duty 12/24 volt, 240 watt pull/push switch. Black button 18mm Ø x 23mm. Requires 8.5mm Ø fixing hole; 2.5mm maximum panel thickness. Switch body 30mm x 20mm maximum overall.

Price incl.VAT £2.80(€3.33)

Quantity:

Switch On/Off pull/push, long Ref: CLS0131
Long neck heavy duty 12/24 volt, 240 watt pull/push switch. Black button 18mm Ø x 23mm. Requires 8.5mm Ø fixing hole; 12mm maximum panel thickness. Switch body 30mm x 20mm maximum overall.

Price incl.VAT £3.35(€3.99)

Quantity:

Switch On/Off pull/push plain knob (SSB104) Ref: CLS0133
This switch can replace the Lucas SPB104 which was used on 60s and early 70s cars including the MGB. It is an On/Off switch rated at 10 amps at 12 volts. It requires a 9.5mm fixing hole and is held in place by a knurled chrome nut and a brass back nut.

Price incl.VAT £13.99(€16.65)

Quantity:

OUT OF STOCK

Switch On/Off pull/push, illuminated Ref: CLS0132
Illuminated pull/push switch in three colours, Amber, Green or Red lens. The smart button is 22mm Ø x 32mm. Requires 12.5mm Ø fixing hole; 8mm maximum panel thickness. Switch body 30mm x 20mm maximum.

Price incl.VAT £10.30(€12.26)

Quantity:

Choose colour

Illuminated rocker switch Ref: CLS014
Illuminated rocker switch supplied with 6 symbols representing: Headlights, Rear foglight, Spot lights, Heated screen, Heated seats, Front foglights & a Blank. Also supplied with 4 coloured lenses, Red, Blue, Green & Amber. Requires a slot 19mm x 34mm to fit.

Price incl.VAT £5.99(€7.13)

Quantity:

Rocker window or aerial switch Ref: CLS0141
Rocker switch with positive action which can be used for electric window operation or electric an aerial. Requires a fixing slot 37mm x 18mm. 12 volt 20 amp.

Price incl.VAT £5.99(€7.13)

Quantity:

Illuminated rocker window switch Ref: CLS0142
Rocker switch with positive action which can be used for electric window operation. This switch is illuminated with an LED bulb to minimise battery drain. Requires a fixing slot 36mm x 20mm. 12 volt, 20 amp.

Price incl.VAT £5.99(€7.13)

Quantity:

Rotary headlight switch Ref: CLS016
Positive action Off/On/On/On. 12/24 volt 130 watt. Black button 44mm long. Requires 26.5mm Ø fixing hole; 3.5mm maximum panel thickness. Switch body 38mm Ø.

Price incl.VAT £13.25(€15.77)

Quantity:

Pull/push headlight switch Ref: CLS0161
12/24 volt 130 watt Pull/push side and headlight switch; 3 positions - off/side lights/headlights. Black button 18mm Ø x 23mm (to match CLS013 & CLS014). Requires 10.5mm Ø fixing hole; 7.5mm maximum panel thickness. Maximum switch dimensions 65mm x 30mm x 30mm.
Click here to see connections

Price incl.VAT £7.95(€9.46)

Quantity:

Headlight foot operated dip switch Ref: CLS0162
Robust positive action foot changeover switch. 12/24 volt 100 watt; surface mounted. 60mm overall hieght. Requires 2 x 5.5mm Ø fixing holes (or self-tapping screws approx. 25mm long) 38mm apart. Black knob. Please note that the new stock now has screw type terminals not Lucar push on terminals.
Click here for wiring diagram

Price incl.VAT £11.69(€13.91)

Quantity:

Rotary headlight switch Lucas style round knob Ref: CLS0163
Positive action headlight or 2-speed fan switch. Similar action to the original Lucas switch. This is a 3 (Lucar) terminal switch with Off-On-ON action.
Click here to see back view

Price incl.VAT £11.45(€13.63)

Quantity:

Column indicator switch illuminated knob. Ref: CLS017
Indicator Switch: column fixing with green illuminated knob.

Price incl.VAT £24.25(€28.86)

Quantity:

Column indicator switch black knob Ref: CLS0171
Indicator Switch: column fixing with black knob.

Price incl.VAT £20.90(€24.87)

Quantity:

Illuminated Indicator Switch, dash mounted twist action. Ref: CLS0172
Dashboard mounted indicator switch with green knob which lights up or flashes when switched on. Requires a 27mm diameter fixing hole.
Click here to see diagram

Price incl.VAT £18.95(€22.55)

Quantity:

Illuminated Indicator flick switch, dash mounted Ref: CLS0173
Dashboard mounted indicator switch with a positive flick action. The green knob lights up when in the 'ON' position. Requires a 18.5mm diameter fixing hole in a panel not exceeding 2mm thick. As this is an ON-OFF-ON switch, it can also be used as a fog or spot light switch.
Click here to see diagram

Price incl.VAT £19.45(€23.15)

Quantity:

3 position ON-OFF-ON double pole black toggle switch Ref: CLS0174
Heavy duty ON-OFF-ON double pole switch. This switch can be used as an indicator switch, a fog or spot light switch or a change-over switch with Off in the middle. It has 6 terminals and can accommodate two separate circuits. Maximum loading is 20 amp at 12 volts (1 headlamp = 5 amp). Requires a 12.5mm mounting hole.

Price incl.VAT £2.99(€3.56)

Quantity:

Stop light switch Ref: CLS0186
A compact stop light switch which makes contact when the plunger is released. The body of the switch is 30mm long and the fixing holes are 24mm apart. This switch is normally "On" (plunger released) and "Off" when the plunger is pushed in.

Price incl.VAT £6.35(€7.56)

Quantity:

Stop light switch with spring & hooked end Ref: CLS0187
Normally off, the switch makes contact when the spring is pulled. The body of the switch is 30mm long and the fixing holes are 24mm apart. The spring including 'S' clip, with a hooked end for ease of mounting, is 93mm long.

Price incl.VAT £7.82(€9.31)

Quantity:

Motor cycle stop light switch with spring Ref: CLS0188
Normally off, the switch makes contact when the spring is pulled. The body of the switch is 30mm long and can be mounted to a tubular bar up to 25mm diameter. The spring including hasp is 87mm long

Price incl.VAT £12.00(€14.28)

Quantity:

Courtesy light extender Ref: CLS0196
This small easily fitted unit keeps the interior courtesy light on for a few seconds after shutting the door. Size 55 x 10mm dia.

Price incl.VAT £5.25(€6.25)

Quantity:

Courtesy light door switch Ref: CLS0197
A smart looking door switch. This switch can be used for the interior light or car alarm. The plunger can be cut to the size required so that it can be used for the bonnet as well as the boot door.

Price incl.VAT £1.45(€1.73)

Quantity:

Push Switch black push/chrome ring Ref: CLS02
Push Switch: Starter/Horn with metal housing. 12/24v/200w with 2 screw terminals. Requires a 22.5mm Ø fixing hole; the black push is 16mm Ø and the ring 26mm Ø.

Price incl.VAT £9.50(€11.31)

Quantity:

Waterproof brass push switch with sleeve Ref: CLS021
High quality solid brass construction this momentary push switch is ideal for kit cars, tractors or any other open enviroment. The rubber cap and sleeve are a tight fit making the switch waterproof. The switch can be operated with the cap in place. Requires a 20mm hole to fit and the overall diameter is 28mm.

Price incl.VAT £9.95(€11.84)

Quantity:

Waterproof brass push switch Ref: CLS0210
This is the same switch as CLS021 without the rear waterproof sleeve.

Price incl.VAT £7.99(€9.51)

Quantity:

Waterproof plastic push switch Ref: CLS022
This is a cheaper alternative to CLS0210. The switch is of high quality plastic construction with a waterproof rubber cap. This switch requires a 25mm diameter hole and is 30mm diameter O/A.

Price incl.VAT £3.99(€4.75)

Quantity:

Red push switch with chrome bezel Ref: CLS020
An attractive looking starter/horn push switch with a chrome bezel and a red button. This switch requires a 20mm fixing hole. The red button is 15mm diameter and the switch is 25mm accross the bezel.

Price incl.VAT £5.50(€6.55)

Quantity:

Chrome push switch Ref: CLS023
A very attractive looking chrome on brass starter/horn push switch. This is a vandal resistant switch that is both heavy duty and smart looking. It can carry 20A @ 12 volts and has brass screw on terminals. It is 22mm (7/8") Ø and requires a 19mm (¾") round hole to fit. Will fit a 12mm (½") panel and it is approx, 30mm overall.

Price incl.VAT £4.99(€5.94)

Quantity:

Ignition Switch (IS1) Ref: CLS07
Ignition Switch: with 2 keys; 3 key positions with ON/Start to the left (clockwise) and Auxiliary On to the right (anti-clockwise). Universal fitting.

Price incl.VAT £6.89(€8.20)

Quantity:

Key switch On/Off. Two flat keys. Ref: CLS071
Key switch 2-position On/Off. The key is removable in both the On and Off position. Requires a fixing hole 19mm Ø. Rated at 6A at 12 volts. Can be fitted to a panel up to 15mm thick. Now with hinged spring cover.
See larger image

Price incl.VAT £6.35(€7.56)

Quantity:

Ignition key switch with all metal body Ref: CLS072
All metal compact design with a polished keyhole and bezel ring. The key switch has four positions; (1) Auxiliary with captive key (2) Off, key removable, (3) On, captive key and (4) Momentary On with spring-back action. Including two high quality keys. Requires a 20mm Ø fixing hole. Rated at 180 W @ 12 volts continous (15A) and 300W (25A) momentary (start)

Price incl.VAT £14.99(€17.84)

Quantity:

Ignition switch with black plastic body Ref: CLS073
A very positive action switch with polished chrome keyhole and smart black bezel ring. The switch has four positions; (1) Auxiliary or security (eg. Alarm) with key removable, (2) Off with key removable, (3) On with captive key and (4) Momentary On (Start). Size of switch 70mm x 42mm overall. Requires a 19mm diameter fixing hole. 20A continous and 30A momentary (Start)

Price incl.VAT £14.99(€17.84)

Quantity:

Ignition switch 3 position (Replaces Lucas 31973) Ref: CLS075
Complete with barrel and two keys this 3 position ignition switch comes assembled and ready to to fit. Requires a 20mm (approx) fixing hole and is suitable for panels up to 6mm thick. The barrel, which is removable, is interchangable with other similar Lucas switch barrels.
Click here for view of connections

Price incl.VAT £17.00(€20.23)

Quantity:

Ignition switch 4 position (Replaces to Lucas 34680) Ref: CLS076
Complete with barrel and two keys this 4 position ignition switch comes assembled and ready to to fit. Requires a 20mm (approx) fixing hole and is suitable for panels up to 6mm thick. The barrel, which is removable, is interchangable with other similar Lucas switch barrels.
Click here for view of connections

Price incl.VAT £17.00(€20.23)

Quantity:

Ignition switch barrel & 2 keys to fit above Lucas type switch Ref: CLS0761
Barrel and two keys. To remove the old barrel insert the correct key, press the locking pin in and pull barrel out. The barrel is interchangable with other similar Lucas switch barrels.
Click here for view of connections

Price incl.VAT £4.99(€5.94)

Quantity:

Ignition switch with two red keys Ref: CLS0762
Four position ignition key switch with Park/Off/On/Starter positions. The switch comes complete with two smart keys and a rubber cover.
Click here for view of connections

Price incl.VAT £10.99(€13.08)

Quantity:

Ignition switch 4 position for tractors and commercial vehicles (Replaces Lucas 34228) Ref: CLS077
Heavy duty 4 position, Off/On/Start and an auxiliary position which may be used for glow plugs (heaters) on a diesel engine. Requires a 16mm fixing hole in a panel up to 3mm thick. The body of this switch is 53mm diameter. The key barrel is an integral part of the switch.
Click here for view of connections

Price incl.VAT £18.99(€22.60)

Quantity:

Ignition switch 5 position for tractors and commercial vehicles (Replaces Lucas 35327) Ref: CLS0771
Heavy duty 5 position, Off/On/Start and an auxiliary position which may be used for glow plugs (heaters) on a diesel engine. Requires a 16mm fixing hole in a panel up to 3mm thick. The body of this switch is 53mm diameter. The key barrel is an integral part of the switch.
Click here for view of connections

Price incl.VAT £18.99(€22.60)

Quantity:

Ignition switch and starter panel Ref: CLS078
Racing style ignition switch with warning light and starter button on a highly polished aluminium plate. The red cover over the ignition toggle switch is raised to turn the ignition ON and this is flipped down to turn off the ignition. Vital for a quick emergency shut off.

New stock expected 16/08/10
Click here for view of connections & dimensions

Price incl.VAT £14.99(€17.84)

Quantity:

OUT OF STOCK

Battery Isolator Switch with removable key Ref: CLS101
Battery isolator switch with removable red plastic key. A simple to fix device to isolate the electrics in a car or boat. Can stop the battery from running down in an infrequently used car or boat. Removing the key makes the vehicle difficult to steal. To allow an alarm to function and maintain the radio code, a 3 amp bypass fuse can be inserted between the terminals. This will immediately blow if the starter is used with the isolator in the off position. Complete with key and waterproof cover.

Price incl.VAT £8.95(€10.65)

Quantity:

Spare key for isolator switch CLS101 Ref: CLS1011
Red plastic key to operate the battery switch CLS101.

Price incl.VAT £1.99(€2.37)

Quantity:

Master switch retro style. Ref: CLS1012
Lucas pattern retro style battery master switch for dashboard or panel fitting. Isolates the battery and is particularly useful for cars that are not used daily. Rated at 100A continuous@12V.

Price incl.VAT £14.50(€17.26)

Quantity:

Master switch Lucas style Ref: CLS1013
A faithful reproduction of the Lucas SSB103 master switch, battery isolator, fitted as standard equipment to the Austin Healey.

Price incl.VAT £58.75(€69.91)

Quantity:

Master battery switch FIA approved Ref: CLS1014
Incorporates a secondary switch to isolate the ignition circuit, a vital safety factor in competition use. At the same time the main electrical circuit is grounded (earthed) through a 3 ohm 11 watt resistor to prevent surge and protect the alternator circuit. A simple and effective anti-theft device for cars, lorries, boats and agricultural vehicles. Can be flush mounted to a panel (max 12mm thick). Requires a mounting hole 22mm Ø and 2 x 6.5mm Ø bolt fixing holes 37mm apart.

Price incl.VAT £30.50(€36.30)

Quantity:

Quick release battery terminal with fused bypass and red knob Ref: CLS1016
Similar to the item above, this comes complete with a blade fuse holder.

Price incl.VAT £9.95(€11.84)

Quantity:

classic-car-parts > CLASSIC CAR ELECTRICAL >