Classic Car Accessories will deliver your order to your door. Wherever possible we use recycled packing material. Our selection of classic and vintage car parts includes chrome mirrors, lights and horns. For terms & conditions see "About us". For "1st Class" or "Next Day" Delivery use the drop down menu on the Payment page.

CheckoutCheckout" border="0" name="nav_checkout" />');

Items Ordered:, Cart Value:

Classic car parts > CLASSIC CAR ELECTRICAL >

SWITCHES

Switch with On/Off Logo plate Ref: CLS01
Switch On/Off: On/Off logo plate; chrome finish; 2-Terminals; 25x14mm. 14mm Ø

Each (Incl.VAT): £1.76

Switch On/Off with chrome finish Ref: CLS011
Switch On/Off: chrome finish; 2-Terminals; 30x18xmm. 14mm Ø

Each (Incl.VAT): £2.68

Switch On/Off (miniature) Ref: CLS012
Switch On/Off: sub-miniature; chrome finish; 2-Terminals. 8x5mm. 7mm Ø.

Each (Incl.VAT): £1.76

Switch On/Off pull/push, short Ref: CLS013
Short neck heavy duty 12/24 volt, 240 watt pull/push switch. Black button 18mm Ø x 23mm. Requires 8.5mm Ø fixing hole; 2.5mm maximum panel thickness. Switch body 30mm x 20mm maximum overall.

Each (Incl.VAT): £2.80

Switch On/Off pull/push, long Ref: CLS014
Long neck heavy duty 12/24 volt, 240 watt pull/push switch. Black button 18mm Ø x 23mm. Requires 8.5mm Ø fixing hole; 12mm maximum panel thickness. Switch body 30mm x 20mm maximum overall.

Each (Incl.VAT): £3.35

Switch On/Off pull/push, illuminated Ref: CLS015
Illuminated pull/push switch in three colours, Amber, Green or Red lens. The smart button is 22mm Ø x 32mm. Requires 12.5mm Ø fixing hole; 8mm maximum panel thickness. Switch body 30mm x 20mm maximum.

Each (Incl.VAT): £6.99

Choose colour

Rotary headlight switch Ref: CLS016
Positive action Off/On/On/On. 12/24 volt 130 watt. Black button 44mm long. Requires 26.5mm Ø fixing hole; 3.5mm maximum panel thickness. Switch body 38mm Ø.

Each (Incl.VAT): £11.60

Pull/push headlight switch Ref: CLS017
Pull/push headlight switch 12/24 volt 139 watt. Black button 18mm Ø x 23mm (to match CLS013 & CLS014). Requires 10.5mm Ø fixing hole; 7.5mm maximum panel thickness. Maximum switch dimensions 65mm x 30mm x 30mm.

Each (Incl.VAT): £6.50

Headlight foot operated dip switch Ref: CLS018
Robust positive action foot changeover switch. 12/24 volt 100 watt; surface mounted. 60mm overall hieght. Requires 2 x 5.5mm Ø fixing holes (or self-tapping screws approx. 25mm long) 38mm apart. Black knob. Please note that the new stock now has screw type terminals not Lucar push on terminals.

Click on image to see wiring diagram

Each (Incl.VAT): £8.95

Push Switch: Starter/Horn Ref: CLS02
Push Switch: Starter/Horn; 2-terminals. 22.5mm Ø.

Each (Incl.VAT): £6.95

Waterproof push switch Ref: CLS021
High quality solid brass construction this momentary push switch is ideal for kit cars, tractors or any other open enviroment. The rubber cap and sleeve are a tight fit making the switch waterproof. The switch can be operated with the cap in place. Requires a 20mm hole to fit and the overall diameter is 28mm.

Each Incl. VAT £9.95

Waterproof push switch Ref: CLS0210
This is the same switch as CLS021 without the rear waterproof sleeve.

Each (Incl.VAT): £7.99

Waterproof push switch Ref: CLS022
This is a cheaper alternative to CLS0210. The switch is of high quality plastic construction with a waterproof rubber cap. This switch requires a 25mm diameter hole and is 30mm diameter O/A.

Each Incl. VAT £3.99

Red push switch Ref: CLS020
An attractive looking starter/horn push switch with a chrome bezel and a red button. This switch requires a 20mm fixing hole. The red button is 15mm diameter and the switch is 25mm O/A.

Each (Incl.VAT): £5.50

Ignition Switch Ref: CLS07
Ignition Switch: with 2 keys; 3 key positions with ON/Start to the left (clockwise) and Auxiliary On to the right (anti-clockwise). Universal fitting.

Each (Incl.VAT): £6.90

Key switch On/Off. Two flat keys. Ref: CLS071
Key switch 2-position On/Off. The key is removable in both the On and Off position.

Each (Incl.VAT): £6.35

Ignition key switch with all metal body Ref: CLS072
All metal compact design with a polished keyhole and bezel ring. The key switch has four positions; (1) Auxiliary with captive key (2) Off, key removable, (3) On, captive key and (4) Momentary On with spring-back action. Including two high quality keys.

Each (Incl.VAT): £14.99

Ignition switch with black plastic body Ref: CLS073
A very positive action switch with polished chrome keyhole and smart black bezel ring. The switch has four positions; (1) Auxiliary or security (eg. Alarm) with key removable, (2) Off with key removable, (3) On with captive key and (4) Momentary On. Size of switch 70mm x 42mm overall. Requires a 19mm diameter fixing hole.

Each (Incl.VAT): £14.99

Ignition switch 3 position (Replaces Lucas 31973) Ref: CLS075
Complete with barrel and two keys this 3 position ignition switch comes assembled and ready to to fit. Requires a 20mm (approx) fixing hole and is suitable for panels up to 6mm thick. The barrel, which is removable, is interchangable with other similar Lucas switch barrels.
Click here for view of connections

Each (Incl. VAT) £16.99

Ignition switch 4 position (Replaces to Lucas 34680) Ref: CLS076
Complete with barrel and two keys this 4 position ignition switch comes assembled and ready to to fit. Requires a 20mm (approx) fixing hole and is suitable for panels up to 6mm thick. The barrel, which is removable, is interchangable with other similar Lucas switch barrels.
Click here for view of connections

Each (Incl. VAT) £16.99

Ignition switch barrel & 2 keys to fit above Lucas type switch Ref: CLS0761
Barrel and two keys. To remove the old barrel insert the correct key, press the locking pin in and pull barrel out. The barrel is interchangable with other similar Lucas switch barrels.

Each (Incl. VAT) £4.99

Ignition switch 4 position for tractors and commercial vehicles (Replaces Lucas 34228) Ref: CLS077
Heavy duty 4 position, Off/On/Start and an auxiliary position which may be used for glow plugs (heaters) on a diesel engine. Requires a 16mm fixing hole in a panel up to 3mm thick. The body of this switch is 53mm diameter. The key barrel is an integral part of the switch.
Click here for view of connections

Each (Incl. VAT) £19.00

Ignition switch 5 position for tractors and commercial vehicles (Replaces Lucas 35327) Ref: CLS0771
Heavy duty 5 position, Off/On/Start and an auxiliary position which may be used for glow plugs (heaters) on a diesel engine. Requires a 16mm fixing hole in a panel up to 3mm thick. The body of this switch is 53mm diameter. The key barrel is an integral part of the switch.
Click here for view of connections

Each (Incl. VAT) £19.00

Battery Isolator Switch with removable key Ref: CLS101
Battery isolator switch with removable red plastic key. A simple to fix device to isolate the electrics in a car or boat. Can stop the battery from running down in an infrequently used car or boat. Removing the key makes the vehicle difficult to steal. To allow an alarm to function and maintain the radio code, a 3 amp bypass fuse can be inserted between the terminals. This will immediately blow if the starter is used with the isolator in the off position. Complete with key and waterproof cover.

Each (Incl.VAT): £8.95

Spare key for isolator switch CLS101 Ref: CLS1011
Red plastic key to operate the battery switch CLS101.

Each (Incl. VAT): £1.99

Water proof cover for isolator switch CLS101 Ref: CLS10110
Fits snugly over the key hole to stop ingress of water and dirt.

Each (Incl. VAT): £1.99

Master switch retro style. Ref: CLS1012
Lucas pattern retro style battery master switch for dashboard or panel fitting. Isolates the battery and is particularly useful for cars that are not used daily.

Each (Incl.VAT): £12.50

Master switch Lucas style Ref: CLS1013
A faithful reproduction of the Lucas SSB103 master switch, battery isolator, fitted as standard equipment to the Austin Healey.

Each (Incl.VAT): £58.75

Master battery switch FIA approved Ref: CLS1014
Incorporates a secondary switch to isolate the ignition circuit, a vital safety factor in competition use. At the same time the main electrical circuit is grounded (earthed) through a 3 ohm 11 watt resistor to prevent surge and protect the alternator circuit. A simple and effective anti-theft device for cars, lorries, boats and agricultural vehicles. Can be flush mounted to a panel (max 12mm thick). Requires a mounting hole 22mm Ø and 2 x 6.5mm Ø bolt fixing holes 37mm apart.

Each (Incl.VAT): £30.50

Lucas RB340 12 volt 22 amp regulator Ref: CLS102
Lucas branded. Three bobbin, current, voltage regulation unit with a cut-out Dynamo regulator. It is an exact reproduction of the original Lucas model RB340. Suitable for 12 volt 22 amp dynamos as used in cars, LGVs and tractors.

Each (Incl.VAT): £32.50

Voltage regulator RB106 Ref: CLS1021S
Lucas branded voltage regulator with five screw terminals as original design.

Each (Incl.VAT): £33.99

Voltage regulator RB106L Ref: CLS10211
Lucas branded voltage regulator with five Lucar, push-on, terminals.

Each (Incl. VAT): £33.99

4TR Lucas type external alternator control box Ref: CLS1022
Four terminal voltage control for alternators. This is a direct replacement for the Lucas TR4 box and fits without the need for any modifications.

Each (Incl. VAT): £34.99

12 Volt ignition coil for standard system (Col201) Lucas equivalent DLB101 Ref: CLS1025
This coil is for the standard ignition system found on older cars and is a direct replacement for the Lucas DLB101. The coil body is 55mm diameter and the coil tower is made from phenolic resin. Complete with fixing clip.

Each (Incl.VAT): £16.50

12 Volt ignition coil for ballast system (Col202) Lucas equivalent DLB102 Ref: CLS10251
This coil is for use where a ballast resitor is used to aid starting. Whilst the starter is being operated the ballast is shorted out, giving the coil the full 12 volts. When the key is released the current is drawn through the ballast lovering the voltage by 2 or 3 volts. This coil is a direct replacement for the Lucas DLB102. The coil body is 55mm diameter and the coil tower is made from phenolic resin. Complete with fixing clip.

Each (Incl.VAT): £16.50

12 Volt ignition coil for electronic system (Col220) Lucas equivalent DLB193 Ref: CLS10252
This coil is used for electronic ignition systems where the mechanical points system ("make & break") is substituted by an electronic switching system. It is a direct replacement for the Lucas DLB193. The coil body is 55mm diameter and the coil tower is made from polyester. Complete with fixing clip.

Each (Incl.VAT): £18.50

Lucas type (COL101) standard 12 volt ignition coil with white polyester coil tower. Ref: CLS10253
Standard non ballast (COL 101) ignition coil which matches the Lucas coil exactly.

Each (Incl. VAT): £18.50

Ballast resistor 1.6 Ohm (Replaces Lucas 47222) for Lucas type coil DLB102 or similar. Ref: CLS1026
Ceramic ballast resistor as used in some ignition circuits where the ignition coil is less than 12 volts; the ballast resistor brings the voltage down to compensate for the lower working voltage of the coil. When the ignition key is turned to "start", the resistor is shorted out, giving the coil the full 12 volts and therefor a much hotter spark. When the ignition key is released the current has to flow through the resistor to give the coil its working voltage. An engine that starts readily but stops when the key is released, often has a defective resistor.

Each (Incl. VAT): £6.50

Ignition module and amplifier Ref: CLS1029
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 7 contacts and has alphanumeric markings 15010 and GAI102.

Click here for larger image

Each (Incl. VAT) £14.99

Ignition module and amplifier Ref: CLS10291
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 4 contacts and has alphanumeric markings 15801 and 079. Used on some Nissan models.

Click here for larger image

Each (Incl. VAT) £14.99

Ignition module and amplifier for Ford Europe and Scimitar Ref: CLS10292
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 4 contacts and has alphanumeric markings 15400 and M071. Used on European Fords and Scimitar amongst other makes.

Click here for larger image

Each (Incl. VAT) £14.99

12v standard solenoid similar to the Lucas OEM product SRB335 Ref: CLS103
Similar to a Lucas OEM product for inertia starter motors

Each (Incl.VAT): £8.99

12v Solenoid with ballast resistor terminal (Replaces Lucas OEM product SRB325) Ref: CLS1031
Similar to CLS102 but with an extra terminal to supply the full 12v momentarily to ballast resistor ignition systems.

Each (Incl.VAT): £8.99

12 volt starter solenoid with manual overide (Replaces Lucas OEM product 76464,76465) Ref: CLS1032
This solenoid has a manual push button (sadly missed on modern cars) to operate the starter from the engine compartment. This facilitates valve and ignition setting by inching the engine forward. And for those of us who can remember that far back, to start a car with a flatish battery.

Each (Incl VAT): £30.99

Overdrive solenoid replacement for Lucas 76515 Ref: CLS1033
12 volt solenoid actuators for overdrive gearboxes fitted to the Austin Healey and other cars of that era. The actuating pin is removable and the existing pin can be slid into its place. The pin that comes with this solenoid is generally used on the Austin Healey

Each (Incl. VAT) £49.99

Overdrive solenoid replacement for Lucas 76522 Ref: CLS1034
12 volt solenoid actuators for overdrive gearboxes fitted to the MGB and other cars of that era. The actuating pin is removable and the existing pin can be slid into its place. The pin that comes with this solenoid is generally used on the gearbox of the MGB as well as other cars. Also used on the Jaguar gearbox.

Each (Incl. VAT) £49.99

Overdrive inhibitor switch Lucas 34531 type Ref: CLS1035
A metal cased overdrive inhibitor switch replacement for Lucas type 34531.

Each (Incl.VAT) £23.50

Headlamp H4 bulb connector Ref: CLS1041
Suitable for plugging into the pins on the H4 halogen as well as the older tungsten headlight bulbs.

Each (Incl.VAT): £2.99

Self-stripping wire connector (Pack of 5) Ref: CLS1045
Also known as Snap-Lock connector this simple time saving device Is the easiest way to connect a new cable to existing wiring. A quick squeeze with pliers is all it takes to form a new connection. Handy pack of 5.

Click on this link to see how it connects

Each pack (Incl.VAT): £0.99

Lucar terminals (red) x10 Ref: CLS105
The most common size in use. You will need a crimping tool, such as CT063 to use these terminals effectively.

10pcs(incl.VAT): £1.25

Lucar piggy-back terminals (red) x10 Ref: CLS1051
The most common size in use. Can be used to make two connections from a single feed. You will need a crimping tool, such as CT063 to use these terminals effectively.

10pcs(incl.VAT): £1.25

Lucar mixed terminals (red) x10 Ref: CLS1052
The most common size in use. Can be used to make two connections from a single feed. You will need a crimping tool, such as CT063 to use these terminals effectively.

10pcs(incl.VAT): £1.25

Auto cable mini reel 5 Amp x 6 metre Ref: CLS107
Multi-strand flexible cable suitable for 12-24 volts low wattage applications such as small bulbs or to actuate relays. This cable has 9 strands x 0.3mm Ø.

Each (Incl.VAT): £3.25

Please choose colour

Auto cable mini reel 8 Amp x 6 metre Ref: CLS1071
Multi-strand flexible cable suitable for 12-24 volts. This cable has 14 strands x 0.3mm Ø.

Each (Incl.VAT): £3.25

Please choose colour

Auto cable mini reel 17 Amp x 4 metre Ref: CLS1072
Multi-strand flexible cable suitable for 12-24 volts. This cable has 28 strands x 0.3mm Ø.

Each (Incl.VAT): £3.25

Please choose colour

Terminal lugs (Pair) Ref: CLS108
Suitable for battery cables. Use these lugs with CLS10/101/102/103. Simply crimp the lug on to the cable with pliers (CT071) and use a blunt chisel or pin punch and hammer to compress. Connection MUST be very tight! 8mm bolt holes.

Pair(incl.VAT): £1.55

Battery lead with lug 300mm Ref: CLS1090
Braided battery lead complete with lugto fit positive or negative battery post. 300mm (approx 12") long.

Each (Incl.VAT): £11.99

Earth lead 300mm Ref: CLS109
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 300mm (12") long.

Each (Incl.VAT): £5.60

Earth lead 450mm Ref: CLS1091
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 450mm (18") long.

Each (Incl.VAT): £6.95

Earth lead 600mm Ref: CLS1092
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 600mm (24") long.

Each (Incl.VAT): £7.99

Battery terminals for round posts. (Pair) Ref: CLS1093
Battery terminals. Positive and negative.

Pair(incl.VAT): £1.75

Solid brass battery terminal lugs (Pair) Ref: CLS10931
These lugs are made from cast brass and tin plated for better conductivity and corrosion resistance. They are fully ROHS compliant.

Incl. VAT £6.75

Battery terminal brush Ref: CLS1094
Battery terminal cleaning brush. Cleans battery posts and clamps.

Each (Incl.VAT): £0.99

Battery retaining bracket Ref: CLS1095
Battery retaining bracket, 380mm wide; can be cut to 215mm wide as there are alternative fixing holes.

Each (Incl.VAT): £3.25

Metal retaining strip Ref: CLS1096
Drilled and slotted galvanised metal strip 450mm x 15mm x 2mm. 5mm holes and 17mm x 5mm slots. Can be bent easily to form a retaining bracket etc.

Each (Incl.VAT): £0.99

Column indicator switch illuminated knob. Ref: CLS11
Indicator Switch: column fixing with green illuminated knob.

Each (Incl.VAT): £21.45

Column indicator switch black knob Ref: CLS111
Indicator Switch: column fixing with black knob.

Each (Incl.VAT): £14.99

Indicator switch, dash mounted. Illuminated. Ref: CLS112
Indicator Switch: dashboard mounting with green illuminated knob. Requires a 27mm diameter fixing hole.
Click on image to see diagram

Each (Incl.VAT): £13.85

Illuminated Indicator toggle switch, dash mounted Ref: CLS113
Toggle Indicator Switch: dashboard mounting with green illuminated knob. Requires a 18.5mm diameter fixing hole in a panel not exceeding 2mm thick. As this is an ON-OFF-ON switch, it can also be used as a fog/spot light switch.
Click on image to see diagram

Each (Incl.VAT): £13.85

12V Horn relay (3-pin) Ref: CLS13
12v Horn relay. Metal case with three contacts, period style

Each (Incl.VAT): £1.79

12v 2-terminal flasher unit Ref: CLS151RD
As fitted to most cars pre mid eighties.

Each (Incl.VAT): £4.65

12v 2-terminal flasher unit Ref: CLS152SQ
As fitted to most cars pre mid eighties.

Each (Incl.VAT): £4.65

12v 3-terminal flasher unit for one to four bulbs. Ref: CLS153
12 volt flasher unit without bulb failure alert. The flash rate remains the same whether one or more bulbs are working as the unit is not load sensitive. 3-terminals.

Each (Incl.VAT): £5.59

12v hazard warning light easy fit system. Ref: CLS16
One of the best safety systems fitted to modern cars has to be the Hazard Warning system. We now take it for granted, but a lot of classic cars still don't have the system fitted. This easy to fit system can be fitted by most competent DIY enthusiasts as fitting instructions come with the system. You may also need CLS1045 to make fitting easier.

Click on the "More" to see fitting instructions.

Each (Incl.VAT): £45.95

Courtesy light extender Ref: CLS17
This small easily fitted unit keeps the interior courtesy light on for a few seconds. Size 55 x 10mm dia.

Each (Incl.VAT): £9.90

Classic car parts > CLASSIC CAR ELECTRICAL >

SWITCHES

CheckoutCheckout" border="0" name="nav_checkout" />');

ADHESIVES

CLASSIC CAR ELECTRICAL

LIGHTS

SWITCHES

BULBS

CAR CARE

HORNS

MIRRORS

EXTERIOR

INTERIOR

TOOLS

MISCELLANEOUS

EXHAUST ACCESSORIES

ENGINE ACCESSORIES

GEAR KNOBS & KEYRINGS & MOTIFS

BADGES & BADGEBARS

WASHERS & WIPERS

MISCELLANEOUS

BONNET LOCKS

AUTOJUMBLE

Buy Online - the best way to buy top gear classic car parts for your classic or modern car or motorcycle. Classic chrome mirrors, mirrors for Minis and kit cars, headlamps, lights, classic old timer horns, modern air horns and tools. Delivery charge for the UK & N.Ireland is only £1.75 per order, Ireland £8.00, Europe £8.00, USA £10.00. For the rest of the world please see "About us". We are based in Greater Manchester, UK.
*For Next Day delivery, orders must be placed before 10:00 am