classic-car-parts
Classic Car Accessories will deliver your order to your door. Wherever possible we use recycled packing material. Our selection of classic and vintage car parts includes chrome mirrors, lights and horns. For terms & conditions see "About us". For "1st Class" or "Next Day" Delivery use the drop down menu on the Payment page. All items with the "Add to Shopping basket" button are held in stock & are dispatched immediately.
Classic Car Accessories  Info Search View Shopping Basket Checkout Send Mail 
Items Ordered:, Cart Value:
 


Solar powered 12 volt battery chargerSolar powered 12 volt battery charger Ref: CLO01
12 volt solar panel charger gives a trickle charge of 1.5 watts whenever light shines on it. Measuring just 352 x 125 x 14mm (14"x5"x½") keeps the battery topped up and does not need direct sunlight. Plug into the cigar lighter socket, and the 2.7m (9ft) lead is long enough to place it near a window, if the car is garaged. Ideal for boats and caravans. A blue flashing LED shows when it is giving a charge. Complete with fused cigar plug, battery clips and suction cups for easy mounting or can be left on the dashboard or seat. 

Each (Incl.VAT): £19.99


Illuminated cigar lighter and holderIlluminated cigar lighter and holder Ref: CLS104
12 volt cigar and cigarette lighter and holder with an orange illuminated ring. These days an indispensable unit which allows you to plug in various accessories including Sat-Navs. Requires a 25mm diameter hole. 
Click on the image for exploded view

Each (Incl.VAT): £4.99


Cigar lighter element and knob ONLYCigar lighter element and knob ONLY Ref: CLS1040
12 volt cigar and cigarette lighter replacement element. 

Each (Incl.VAT): £1.75


Headlamp H4 bulb connectorHeadlamp H4 bulb connector Ref: CLS1041
Suitable for plugging into the pins on the H4 halogen as well as the older tungsten headlight bulbs.

 

Each (Incl.VAT): £2.99


Ceramic headlamp H4 bulb connectorCeramic headlamp H4 bulb connector Ref: CLS1042
Suitable for plugging into the pins on the H4 halogen as well as the older tungsten headlight bulbs. This ceramic unit is ideal for high wattage bulbs which can get very hot

 

Each (Incl.VAT): £3.50


Self-stripping wire connector (Pack of 5)Self-stripping wire connector (Pack of 5) Ref: CLS1045
Also known as Snap-Lock connector this simple time saving device Is the easiest way to connect a new cable to existing wiring. A quick squeeze with pliers is all it takes to form a new connection. Handy pack of 5.

 
Click on this link to see how it connects


Each pack (Incl.VAT): £0.99


Lucar terminals (red) x10Lucar terminals (red) x10 Ref: CLS105
The most common size in use. You will need a crimping tool, such as CT063 to use these terminals effectively. 

10pcs(incl.VAT): £1.25


Lucar piggy-back terminals (red) x10Lucar piggy-back terminals (red) x10 Ref: CLS1051
The most common size in use. Can be used to make two connections from a single feed. You will need a crimping tool, such as CT063 to use these terminals effectively. 

10pcs(incl.VAT): £1.25


Lucar mixed terminals (red) x10Lucar mixed terminals (red) x10 Ref: CLS1052
The most common size in use. Can be used to make two connections from a single feed. You will need a crimping tool, such as CT063 to use these terminals effectively. 

10pcs(incl.VAT): £1.25


Auto cable mini reel 5 Amp x 6 metreAuto cable mini reel 5 Amp x 6 metre Ref: CLS107
Multi-strand flexible cable suitable for 12-24 volts low wattage applications such as small bulbs or to actuate relays. This cable has 9 strands x 0.3mm Ø.  

Each (Incl.VAT): £3.25

Please choose colour


Auto cable mini reel 8 Amp x 6 metreAuto cable mini reel 8 Amp x 6 metre Ref: CLS1071
Multi-strand flexible cable suitable for 12-24 volts. This cable has 14 strands x 0.3mm Ø.  

Each (Incl.VAT): £3.25

Please choose colour


Auto cable mini reel 17 Amp x 4 metreAuto cable mini reel 17 Amp x 4 metre Ref: CLS1072
Multi-strand flexible cable suitable for 12-24 volts. This cable has 28 strands x 0.3mm Ø.  

Each (Incl.VAT): £3.25

Please choose colour


Terminal lugs (Pair)Terminal lugs (Pair) Ref: CLS108
Suitable for battery cables. Use these lugs with CLS10/101/102/103. Simply crimp the lug on to the cable with pliers (CT071) and use a blunt chisel or pin punch and hammer to compress. Connection MUST be very tight! 8mm bolt holes. 

Pair(incl.VAT): £1.55


12 Volt ignition coil for standard system (Col201) Lucas equivalent DLB10112 Volt ignition coil for standard system (Col201) Lucas equivalent DLB101 Ref: CLS1025
This coil is for the standard ignition system found on older cars and is a direct replacement for the Lucas DLB101. The coil body is 55mm diameter and the coil tower is made from phenolic resin. Complete with fixing clip. 

Each (Incl.VAT): £16.50


12 Volt ignition coil for ballast system (Col202) Lucas equivalent DLB10212 Volt ignition coil for ballast system (Col202) Lucas equivalent DLB102 Ref: CLS10251
This coil is for use where a ballast resitor is used to aid starting. Whilst the starter is being operated the ballast is shorted out, giving the coil the full 12 volts. When the key is released the current is drawn through the ballast lovering the voltage by 2 or 3 volts. This coil is a direct replacement for the Lucas DLB102. The coil body is 55mm diameter and the coil tower is made from phenolic resin. Complete with fixing clip. 

Each (Incl.VAT): £16.50


12 Volt ignition coil for electronic system (Col220) Lucas equivalent DLB19312 Volt ignition coil for electronic system (Col220) Lucas equivalent DLB193 Ref: CLS10252
This coil is used for electronic ignition systems where the mechanical points system ("make & break") is substituted by an electronic switching system. It is a direct replacement for the Lucas DLB193. The coil body is 55mm diameter and the coil tower is made from polyester. Complete with fixing clip. 

Each (Incl.VAT): £18.50


Lucas type (COL101) standard 12 volt ignition coil with white polyester coil tower.Lucas type (COL101) standard 12 volt ignition coil with white polyester coil tower. Ref: CLS10253
Standard non ballast (COL 101) ignition coil which matches the Lucas coil exactly. 

Each (Incl. VAT): £18.50


Ballast resistor 1.6 Ohm (Replaces Lucas 47222) for Lucas type coil DLB102 or similar.Ballast resistor 1.6 Ohm (Replaces Lucas 47222) for Lucas type coil DLB102 or similar. Ref: CLS1026
Ceramic ballast resistor as used in some ignition circuits where the ignition coil is less than 12 volts; the ballast resistor brings the voltage down to compensate for the lower working voltage of the coil. When the ignition key is turned to "start", the resistor is shorted out, giving the coil the full 12 volts and therefor a much hotter spark. When the ignition key is released the current has to flow through the resistor to give the coil its working voltage. An engine that starts readily but stops when the key is released, often has a defective resistor. 

Each (Incl. VAT): £6.50


Spark plug testerSpark plug tester Ref: CLS10261
Inserted between the spark plug and the high tension lead, the unit flashes each time the spark plug fires. This immediately highlights a problem if the plug is defective as the unit will not flash or flashes erratically. You can also discover which cylinder is misfiring, something which is difficult without this gadget.  

Each (Incl. VAT): £1.99


Distributor cap push fit type 45D4Distributor cap push fit type 45D4 Ref: CLS1027
This cap is used on many 4 cylinder BMC engines fitted to the MGB, Midget, Sprite and many others. It is similar to the Lucas GDC136 cap. It is a push fit cap, held on by spring clips, with push fit high tension lead sockets. Distributor caps can develop faults which are difficult to see with the naked eye. This causes misfiring, often only when the engine is under load, so it will tick over sweetly but becomes rough under acceleration.  

Each (Incl. VAT): £5.99


Rotor arm for 45D4 & 45D6 distributorsRotor arm for 45D4 & 45D6 distributors Ref: CLS10271
Rotor arm for the popular 45D4 and 45D6 distributors fitted to the MGB, Midget, Sprite and many other BMC engined cars. Similar to Lucas GRA2114. 

Each (Incl. VAT): £3.50


Condensor for 45D4 distributorCondensor for 45D4 distributor Ref: CLS10272
The all important condensor for the 45D4 and 45D6 distributors. Similar to Lucas GSC118. 

Each (Incl. VAT): £4.50


Ignition module and amplifierIgnition module and amplifier Ref: CLS1029
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 7 contacts and has alphanumeric markings 15010 and GAI102.

 
Click here for larger image

Each (Incl. VAT) £14.99


Ignition module and amplifierIgnition module and amplifier Ref: CLS10291
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 4 contacts and has alphanumeric markings 15801 and 079. Used on some Nissan models.

 
Click here for larger image

Each (Incl. VAT) £14.99


Ignition module and amplifier for Ford Europe and ScimitarIgnition module and amplifier for Ford Europe and Scimitar Ref: CLS10292
This ignition module works in conjuntion with a magnetic pick-up system used on cars in the eighties and early ninties. It has 4 contacts and has alphanumeric markings 15400 and M071. Used on European Fords and Scimitar amongst other makes.

 
Click here for larger image

Each (Incl. VAT) £14.99


Metal retaining stripMetal retaining strip Ref: CLS1096
Drilled and slotted galvanised metal strip 450mm x 15mm x 2mm. 5mm holes and 17mm x 5mm slots. Can be bent easily to form a retaining bracket etc. 

Each (Incl.VAT): £0.99


Battery retaining bracketBattery retaining bracket Ref: CLS1095
Battery retaining bracket, 380mm wide; can be cut to 215mm wide as there are alternative fixing holes. 

Each (Incl.VAT): £3.25


Battery terminal brushBattery terminal brush Ref: CLS1094
Battery terminal cleaning brush. Cleans battery posts and clamps. 

Each (Incl.VAT): £0.99


Solid brass battery terminal lugs (Pair)Solid brass battery terminal lugs (Pair) Ref: CLS10931
These lugs are made from cast brass and tin plated for better conductivity and corrosion resistance. They are fully ROHS compliant. 

Incl. VAT £6.75


Battery terminals for round posts. (Pair)Battery terminals for round posts. (Pair) Ref: CLS1093
Battery terminals. Positive and negative. 

Pair(incl.VAT): £1.75


Battery lead with lug 300mmBattery lead with lug 300mm Ref: CLS1090
Braided battery lead complete with lugto fit positive or negative battery post. 300mm (approx 12") long. 

Each (Incl.VAT): £11.99


Earth lead 300mmEarth lead 300mm Ref: CLS109
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 300mm (12") long. 

Each (Incl.VAT): £5.60


Earth lead 450mmEarth lead 450mm Ref: CLS1091
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 450mm (18") long. 

Each (Incl.VAT): £6.95


Earth lead 600mmEarth lead 600mm Ref: CLS1092
Braided lead for earthing engine to chassis or as a battery lead to some batteries that have flat posts (some Fords). Approximately 600mm (24") long. 

Each (Incl.VAT): £7.99


Metal 7 pin trailer socketMetal 7 pin trailer socket Ref: CLS11
Smart aluminium 7 pin standard trailer socket 
Click on image to see back view

Each (Incl.VAT): £4.75


Metal 7 pin trailer plugMetal 7 pin trailer plug Ref: CLS110
Smart aluminium 7 pin standard trailer plug 

Each (Incl.VAT): £3.99

Classic Car Accessories  Info Search View Shopping Basket Checkout Send Mail 

Buy Online - the best way to buy top gear classic car parts for your classic or modern car or motorcycle. Classic chrome mirrors, mirrors for Minis and kit cars, headlamps, lights, classic old timer horns, modern air horns and tools. Delivery charge for the UK & N.Ireland is only £1.75 per order, Ireland £8.00, Europe £8.00, USA £10.00. For the rest of the world please see "About us". We are based in Greater Manchester, UK.
*For Next Day delivery, orders must be placed before 10:00 am




Acceptance Mark