1. Home
  2. Login
  3. View Shopping Basket
  4. CHECKOUT

Classic Car Accessories was established in 1999 and is based in Greater Manchester UK. Our selection of classic and vintage car parts includes chrome mirrors, lights, horns, switches, badge bars, badges, washers and wipers. We deliver worldwide at a very reasonable shipping charge (see “About us”).

FLASHER UNITS & RELAYS

12v hazard warning light easy fit system.

12v hazard warning light easy fit system.

One of the best safety systems fitted to modern cars has to be the Hazard Warning system. We now take it for granted, but a lot of classic cars still don't have the system fitted. This easy to fit system can be fitted by most competent DIY enthusiasts as fitting instructions come with the system. You may also need CLS1045 to make fitting easier.

Price incl.VAT 41.95 [56.63]

Ref: CLS018

Click here to see fitting instructions

12v 2-terminal flasher unit

12v 2-terminal flasher unit

As fitted to most cars pre mid eighties.

Price incl.VAT 4.65 [6.28]

Ref: CLS0181RD

12v 2-terminal flasher unit

12v 2-terminal flasher unit

As fitted to most cars pre mid eighties. 12v x Max 94 watts. The unit is 33mm x 20mm x 33mm deep.

Price incl.VAT 4.65 [6.28]

Ref: CLS0182SQ

12v 3-terminal flasher unit for one to four bulbs.

12v 3-terminal flasher unit for one to four bulbs.

12 volt flasher unit without bulb failure alert. The flash rate remains the same whether one or more bulbs are working as the unit is not load sensitive. 3-terminals.

Price incl.VAT 5.59 [7.55]

Ref: CLS0183BR

Click on image to see connection details

12v 3-terminal electronic flasher unit (FL3)

12v 3-terminal electronic flasher unit (FL3)

12 volt electronic flasher unit with 3 terminals marked 19, 31 & 49A. Similar to Lucas SFB170, SFB182 and SFB190 Suitable for most cars with a 12 volt system. Size 40mm x 30mm x 30mm

Price incl.VAT 7.99 [10.79]

Ref: CLS0184

Click here for wiring diagram

12V general purpose relay (SRB111)

12V general purpose relay (SRB111)

4 pin relay with one pin doubled up. This relay can replace Lucas SRB111. It is normally open (Off) untill a low wattage supply is fed to pins W1 and C2. W2 is connected to the battery, via a fuse, and the load (lights, horn etc) is connected to C1. The switch W2/C1 can carry 20 amps at 12 volts.

Price incl.VAT 22.45 [30.31]

Ref: CLS0190

See pinout and internal wiring diagrams.

12V relay equivalent to Lucas SRB143

12V relay equivalent to Lucas SRB143

5 pin12 volt 20 amp relay . This relay can replace Lucas SRB143.

Price incl.VAT 22.45 [30.31]

Ref: CLS01901

Click here to see larger view.

12V 4-pin relay

12V 4-pin relay

12v 4 PIN relay. A relay is used primarily to cut down voltage drop and preserve the primary switch on the dashboard. Use a relay for headlights, fog or spot lights and horns etc.

Price incl.VAT 1.99 [2.69]

Ref: CLS01902

Read this for more information Use Backspace or back button to return here

12V 5-pin changeover relay

12V 5-pin changeover relay

12v 5 PIN change-over relay. A relay is used primarily to cut down voltage drop as power is taken directly from the main light switch to the headlights. The change-over relay should be positioned near the lights, or close to the fuse box. The relay is activated from the Main/Dipped beam switch. The main switch should also work through a relay. 30A @ 12V Maximum.

See diagram Use the Backspace or the Back button to return here.

Price incl.VAT 3.30 [4.46]

Ref: CLS0191

Click here to see base

Read this for more information. Use Backspace or back button to return here

24V 5-pin changeover relay

24V 5-pin changeover relay

24v 5 PIN change-over relay. A relay is used primarily to cut down voltage drop as power is taken directly from the main light switch to the headlights. The change-over relay should be positioned near the lights, or close to the fuse box. The relay is activated from the Main/Dipped beam switch. The main switch should also work through a relay.

Price incl.VAT 2.99 [4.04]

Ref: CLS01911

Click here to see base