classic-car-parts >

TOOLS


		Small 12 volt compressor Ref: CT00121 This easy to use compressor is small enough to go into the glove compartment. Just plug the lead into the cigarette socket and off you go! Price incl.VAT £10.75(€13.33)
		Quantity: OUT OF STOCK

		Tyre pressure gauge ABS plastic Ref: CT0013 Chrome abs plastic tyre pressure gauge, with a clear black on white scale 5-50lbs/0.5-3.5kg. Tyres should be checked at least once a week. Price incl.VAT £1.99(€2.47)
		Quantity:

		Tyre pressure gauge chromed metal Ref: CT00131 Chrome plated metal tyre pressure gauge, with a clear red on white scale 5-50lbs/0.5-3.5kg. This gauge has a handy pocket clip and is shock proof. Tyres should be checked at least once a week. Price incl.VAT £2.50(€3.10)
		Quantity: OUT OF STOCK

		Tyre pressure gauge with dial Ref: CT0015 Clear, easy to use tyre pressure gauge. The pressure reading remains on the gauge until cancelled. The clear dial goes from 0 to 75lbs/5Kgs. Under or over inflated tyres are dangerous and illegal. Price incl.VAT £2.50(€3.10)
		Quantity:

		Metal tyre pressure gauge Ref: CT00132 With a clear 2" (50mm) white dial clearly marked in Lbs and Kgs from 0.5lbs (0.7kgs) to 64lbs (4.5kgs). A reset button allows you to read the tyre pressure after removing the gauge from the tyre valve. In smart black and chrome. Price incl.VAT £6.99(€8.67)
		Quantity:

		Digital tyre pressure gauge Ref: CT00133 Digital tyre pressure gauge and a tyre tread depth gauge indicating the minimum legal limit as well as the safe winter minimum depth. The gauge displays the tyre pressure in PSI, Bar, Kg/cm and Kps. The gauge turns off automatically 30 seconds after last use or hold the On/Off button for 3 second to manually turn off. Please check your tyre pressure at least once a week! Price incl.VAT £6.99(€8.67)
		Quantity:

		Tyre service kit Ref: CT00134 Tyre service kit consisting of a pencil type pressure gauge, a thread depth gauge, a 4-in-1 tyre valve tool and 4 handy valve caps which can be removed and replaced easily without getting your hands dirty. Price incl.VAT £4.99(€6.19)
		Quantity:

		Brake Adjuster Ref: CT01 Spanner for adjusting brakes on older cars. For square adjusters 11/32" or 1/4" accross the flats. Suitable for most Girling and Lockheed brakes. Each (Incl.VAT): £2.00(€2.48)
		Quantity:

		Cranked spanner Ref: CT011 Cranked spanner: tappet adjuster tool for Ford 4-cylinder OHC engine. Price incl.VAT £2.00(€2.48)
		Quantity:

		Adjustable spanner Ref: CT012 200mm (8") adjustable crescent spanner. Accurate jaws open 25mm with venier scale. Smooth satin finish. Price incl.VAT £4.95(€6.14)
		Quantity:

		Adjustable spanner Ref: CT0121 200mm (8") adjustable crescent spanner. An everyday useful tool, invaluable in the toolkit. Without the satin finish and vernier scale, it is still a very good spanner. Price incl.VAT £2.95(€3.66)
		Quantity:

		Adjustable wrench Ref: CT0122 Luxury 200mm (8") adjustable crescent spanner with venire scale to quickly set the size. Comfortable non slip cushion grip and has a useful 13mm ring spanner end. Pleasing satin finish with hardened steel jaws. A good looking, useful tool. Price incl.VAT £5.99(€7.43)
		Quantity:

		Deep socket set ¼" drive Ref: CT013 Drop forged chrome plated ¼" drive deep sockets. Eight piece set 5½mm to 12mm; complete with storage rack. Price incl.VAT £5.95(€7.38)
		Quantity:

		Deep socket set 3/8" drive Ref: CT0131 Drop forged chrome plated 3/8" drive deep sockets. Eight piece set 10mm to 19mm; complete with storage rack. Price incl.VAT £12.25(€15.19)
		Quantity:

		Deep socket set ½" drive Ref: CT0132 9 piece drop forged ½" drive deep socket set with wall mountable storage rack. Size 13,14,16,17,19,21,22 & 24mm x 75mm long. Price incl.VAT £14.80(€18.35)
		Quantity:

		Open end metric spanners Ref: CT014 5 piece drop forged open ended spanner set comprising one each of 5x9, 10x11, 12x13, 14x15 and 16x17 spanners, 100mm to 140mm long. Price incl.VAT £3.20(€3.97)
		Quantity:

		Combination metric spanners Ref: CT0141 5 piece drop forged combination spanner set comprising one each of 8, 10, 12, 14 and 15mm. Over all length of the spanners is from 120mm to 190mm Price incl.VAT £3.85(€4.77)
		Quantity:

		Combination AF spanners Ref: CT0142 5 piece drop forged AF combination spanner set comprising one each of 3/8", 7/16", 1/2", 9/16" and 5/8". Over all length of the spanners is from 140mm to 200mm (5½" to 8") Price incl.VAT £5.75(€7.13)
		Quantity:

		6-pc hexagon bit set Ref: CT016 Chrome-vanadium steel. Sizes 4, 5, 6, 7, 8 & 10mm with 3/8" drive adaptor in a grey metal case. Price incl.VAT £5.75(€7.13)
		Quantity: OUT OF STOCK

		9-pc hexagon key set Ref: CT0162 Hardened steel hexagon key set. Sizes 1.5mm to 10mm. Always wear goggles when using hardened steel tools. Price incl.VAT £6.25(€7.75)
		Quantity:

		8-pc torx key set Ref: CT0163 Hardened steel torx key set T9 to T40 set in a handy, integral soft touch holder. Always wear goggles when using hardened steel tools. Price incl.VAT £6.25(€7.75)
		Quantity:

		Oil filter wrench Ref: CT021 Oil filter removal tool. Three position head with non slip jaws. Suitable for spin-on filters of 75mm to 100mm (3" to 4") Click here to see how this tool is used Price incl.VAT £7.15(€8.87)
		Quantity:

		Spark plug socket spanner for 22mm standard plugs Ref: CT022L Drop forged, polished socket spanner for standard 22mm spark plug with rubber insert to protect and grip the spark plug; universal joint to facilitate removal of awkwardly placed plugs and plastic covered soft grip T handle. Price incl.VAT £2.95(€3.66)
		Quantity:

		Spark plug spanner for 16mm plugs Ref: CT023S Drop forged, polished socket spanner for narow 16mm spark plug with rubber insert to protect and grip the spark plug; universal joint to facilitate removal of awkwardly placed plugs and plastic covered T handle. Price incl.VAT £2.95(€3.66)
		Quantity: OUT OF STOCK

		Coil spring compressor. Ref: CT024 Coil spring remover for dismantling suspension struts. An indispensable tool for compressing suspension springs safely. Price incl.VAT £15.30(€18.97)
		Quantity: OUT OF STOCK

		Ball joint separator Ref: CT025 An invaluable tool for that most important job of changing a ball joint. Insert and hammer away from the steering rack/box. Price incl.VAT £4.95(€6.14)
		OUT OF STOCK

		Touch-up spray gun Ref: CT03 For touching up and small jobs. Air pressure requirement 4CFM at 30 - 50 PSI. Paint container approx. 250ml. The gun has an adjustment for paint volume delivery and pattern. Price incl.VAT £24.50(€30.38)
		Quantity:

		Quick coupler compressed air line set Ref: CT031 The set consists of a quick coupler, three nipples with a male thread and one with a female threaded socket. Price incl.VAT £8.25(€10.23)
		Quantity:

		Spray gun Ref: CT032 Gravity feed spray gun. Works at a pressure of 3.5 to 4.0 bar. Ideal for DIY as this gun will only require approximately 4 CFM, so a small compressor can cope. 1.5mm nozzle suitable for most spray jobs. Price incl.VAT £19.95(€24.74)
		Quantity: OUT OF STOCK

		Air brush kit Ref: CT033 The kit consists of: the airbrush adjustable for paint flow & pattern size, flexible coiled air hose, two glass reservoirs & a cap. Requires very little air, so will run on any compressor or air supply. A surprisingly large area can be painted, making this an ideal touch-up tool. Always clean with appropriate solvent after use. Price incl.VAT £19.95(€24.74)
		Quantity:

		Air dust gun and coiled hose Ref: CT034 Extends to approximately 7.5m (25') x 6.5mm. Nylon construction with a high resistance to oils and grease. This hose will re-coil itself to a fraction of its stretched length. Price incl.VAT £6.99(€8.67)
		Quantity:

		1 pint oil measuring jug & pourer Ref: CT04 Measuring jug: 1 Pint: classic oil pourer. Tin plated. Made in England. Price incl.VAT £8.50(€10.54)


		1 quart oil measuring jug & pourer Ref: CT041 Measuring jug. 1 Quart: classic oil pourer. Tin plated. Made in England. Price incl.VAT £9.50(€11.78)
		Quantity:

		Oil can with flexible nozzle 1 pint Ref: CT0421 1 pint oil can with a flexible swivel spout. Ideal for oiling door hinges, pedal linkages etc. Colour may vary. Price incl.VAT £4.20(€5.21)
		Quantity:

		Oil can with flexible nozzle 200ml Ref: CT0422 A handy sized oil can to get to awkward places like door hinges, locks and pedal linkages Price incl.VAT £2.75(€3.41)
		Quantity:

		Grease gun Ref: CT044 All metal re-fillable grease gun. Simply unscrew the pump/nozzle and suck in up approximately 17 cu. cm of grease into the 200mm x 42mm Ø body. The nozzle has a 130mm reach with the rigid extension and 285mm with the flexible extension. The gun is approximately 300mm overall. Price incl.VAT £12.25(€15.19)
		Quantity: OUT OF STOCK

		Hammer Ref: CT051 16oz claw hammer with hollow metal shaft and soft grip handle Price incl.VAT £2.00(€2.48)
		Quantity:

		Tool kit Ref: CT050 Starter tool kit consisting of: 8 pocket tool roll, 2m measuring tape, 6" combination pliers, Junior hacksaw, 14mm cross pein hammer, Utility knife, Flat screwdriver and a Cross point screwdriver. Price incl.VAT £3.50(€4.34)
		Quantity:

		Parallel pin punch set Ref: CT052 Set of four punches 1/16", 3/32", 1/8", & 5/32" (1.5mm to 3.9mm) Price incl.VAT £4.70(€5.83)
		OUT OF STOCK

		Heavy duty parallel pin punch or drift set Ref: CT053 Set of five steel punches or drifts 1/8", 3/16", 1/4", & 3/8" (3.2mm, 4.9mm, 6.3mm, 7.7mm & 9.6m) Price incl.VAT £6.80(€8.43)
		Quantity: OUT OF STOCK

		5 piece Hole punch set Ref: CT054 Set of five steel hole punches Price incl.VAT £3.99(€4.95)
		Quantity:

		Mini hacksaw Ref: CT06 A simple and effective tool. Price incl.VAT £0.50(€0.62)
		Quantity:

		Professional wire stripper Ref: CT061 Professional, heavy duty auto wire stripper. Quick clean wire stripping. Also incorporates a positive wire cutter and terminal crimper. The wire stripper used by telecoms engineers. Price incl.VAT £5.50(€6.82)
		Quantity:

		6 to 24 volt circuit tester Ref: CT062 6 to24volt circuit tester for continuity. Handy to test for blown bulbs, fuses etc. 135mm (5½"). Price incl.VAT £1.55(€1.92)
		Quantity: OUT OF STOCK

		Digital multi-meter Ref: CT062101 A handy multi tester for AC/DC volts, DCmA and resistance (ohms) and for checking transistors. Ideal for tracing open circuits (cut wires) and dry joints (bad connections) Price incl.VAT £9.95(€12.34)
		Quantity: OUT OF STOCK

		30 watt soldering iron Ref: CT0622 30 watt 240 volt soldering iron with stand, fitted with a 13 amp plug (suitable for the UK). CE/GS marked. Price incl.VAT £6.75(€8.37)
		Quantity:

		60 watt soldering iron Ref: CT0623 60 watt 240 volt soldering iron with stand, fitted with a 13 amp plug (suitable for the UK). CE/GS marked. Price incl.VAT £9.20(€11.41)
		Quantity:

		Crimping tool Ref: CT063 Crimping tool for electrical terminals and a wire cutter and stripper for cables up to 6mm. Removes outer sheath as well as stripping inner cables. Crimps ignition terminals and can cut mild steel bolts up to 5mm. Click here to go to Lucar terminals Price incl.VAT £6.99(€8.67)
		Quantity:

		Miniature pipe cutter Ref: CT0641 Tube or pipe cutter for thin walled tubes, brake pipes or central heating pipes. Will cut 3mm to 22mm (1/8" - 7/8") copper or mild steel tubes cleanly and easily. Will also cut stainless steel tubing. Price incl.VAT £3.50(€4.34)
		Quantity:

		Pipe bender Ref: CT0642 Suitable for 6mm, 8mm and 10mm diameter mild steel, copper or brass tubing. Aluminium alloy construction it can bend tubes accurately up to 180 degrees. Price incl.VAT £14.99(€18.59)
		Quantity:

		Gas pencil torch Ref: CT065 A small incredibly effective refillable gas torch. Produces a well defined very hot blue flame useful for heating a localised small area, soldering etc. Refillable with normal gas lighter fuel. Individually tested. Price incl.VAT £7.99(€9.91)
		Quantity:

		Gas pencil torch and soldering iron Ref: CT06510 Small and incredibly powerful refillable gas torch. Use it as a blow torch or a handy cordless soldering iron. The torch is 175mm x 20mm Ø without the soldering tip and 213mm with the tip in place. The flame is adjustable and it has a fold out stand to allow you to put it down without turning the flame off. Each torch is tested and comes with instructions. The torch is refillable from a standard gas lighter cannister available from most stationers and tabacconists. Price incl.VAT £22.80(€28.27)
		Quantity:

		Gas pencil torch and soldering iron Ref: CT0652 Small and incredibly powerful refillable gas torch. Use it as a blow torch or a handy cordless soldering iron. Comes with two soldering bits (one shown) Price incl.VAT £5.95(€7.38)
		Quantity: OUT OF STOCK

		Gas torch Ref: CT0653 Powerful refillable butane gas powered torch with auto ignition. Gives a very high temperature - it makes the tip of a metal strip 16mm x 3mm glow red in less than 90 seconds. Many uses in the garage including loosening stubborn nuts and bolts. Use it in the kitchen to make crème brulee! Price incl.VAT £11.75(€14.57)
		Quantity:

		Locking pliers with long slim jaws. 160mm overall Ref: CT07 Locking pliers with long nose for access to "difficult to reach" areas. Drop forged, heat treated jaws.160mm long Price incl.VAT £3.35(€4.15)
		Quantity:

		Locking pliers with long slim jaws. 150mm overall Ref: CT0701 Comfortable to use cushion grip with long slim powerful jaws. The jaws are 45mm (1 3/4") deep, with a tip that's just 6mm (¼") wide it is a useful tool to have around. 150mm (6") long overall. Price incl.VAT £4.75(€5.89)
		Quantity: OUT OF STOCK

		Locking pliers with long slim jaws 200mm Ref: CT0702 Comfortable to use cushion grip with long slim powerful jaws. The jaws are 65mm (2½") deep, with a tip that's just 6.5mm (¼") wide it is a useful tool to have around. 200mm (8") long overall. Price incl.VAT £5.99(€7.43)
		Quantity:

		10" Lockgrip pliers Ref: CT0703 250mm (10") locking pliers. Accurate well shaped jaws incorporating a wire cutter. Price incl.VAT £2.95(€3.66)
		Quantity:

		Combination pliers 170mm Ref: CT071 Sturdy combination pliers with side cutter. Comfortable non slip handles. GS quality mark. Price incl.VAT £4.95(€6.14)
		Quantity:

		Long nose pliers 150mm Ref: CT072 Sturdy long nose pliers with side cutter. Comfortable non slip handles. GS quality mark. Price incl.VAT £4.95(€6.14)
		Quantity:

		Mini folding pliers 100mm Ref: CT073 Stainless steel folding pliers. Folding into the handles it has a small pair of scissors, two screwdrivers, a bottle opener and a penknife. Folds down to approximately 65mm x 20mm x 10mm. Price incl.VAT £4.95(€6.14)
		Quantity:

		Mini combination pliers 115mm Ref: CT074 Ideal for working on small items. Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws, with side cutter, 6mm wide. Price incl.VAT £2.25(€2.79)
		Quantity:

		Mini needle nose pliers 150mm Ref: CT0741 Ideal for working on small items. Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws, just 1mm wide at the tip. Price incl.VAT £2.25(€2.79)
		Quantity: OUT OF STOCK

		Bent nose pliers 160mm Ref: CT0742 Long reach small pliers. Unusually these pliers have short jaws and long handles giving a strong grip. Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws, just 1mm wide at the tip. Price incl.VAT £3.50(€4.34)
		Quantity:

		End cutting pliers 180mm Ref: CT0744 End cutting pliers. Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws. Price incl.VAT £3.85(€4.77)
		Quantity:

		Internal circlip pliers 150mm Ref: CT075 Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws. Price incl.VAT £2.50(€3.10)
		OUT OF STOCK

		Internal and external circlip pliers Ref: CT0750 Hardened carbon steel interchangeable jaws and soft grip handles, spring loaded for ease of use. Three sets of jaws: Internal and external straight, internal and external 90° angle and internal and external 45° angle, giving you six functions. The jaws are easily replaced with a positive action spring loaded spindle. The tool is 155mm (6") long with jaws in place. Price incl.VAT £4.99(€6.19)
		Quantity:

		External circlip pliers 150mm Ref: CT0751 Soft grip handles, spring loaded for ease of use. Reasonably hard accurate jaws. Price incl.VAT £3.05(€3.78)
		Quantity:

		Hand riveter with four nozzles Ref: CT0761 Pop riveter with four nozzles to set rivet sizes 2.4mm to 4.8mm. 240mm overall it is a convenient size for most pop rivet work. Complete with a selection of pop rivets Price incl.VAT £7.60(€9.42)
		Quantity:

		Two handed heavy duty riveter Ref: CT077 The two 360mm (14½") handles give this riveter tremendous power. Complete with three nozzles. Price incl.VAT £10.15(€12.59)
		Quantity:

		Rotary file set. Ref: CT081 Set of five rotary files with 6mm shank. Use with an electric drill for shaping and fitting. Price incl.VAT £3.99(€4.95)
		Quantity: OUT OF STOCK

		5 piece Easy-out-Screw extractor set Ref: CT082 5 sizes to remove sheared off bolts etc from 3mm to 14mm. Drill stud, soak with penetrating oil, and unscrew with care. Price incl.VAT £4.10(€5.08)
		Quantity:

		6 piece Easy-out Screw extractor set Ref: CT0821 6 sizes to remove sheared off bolts etc from 3mm to 20mm Ø. Drill stud, soak with penetrating oil, and unscrew with care. Made from high grade heat treated steel. Always use eye protection when using heat treated tools. Price incl.VAT £5.50(€6.82)
		Quantity:

		20 piece tap & die set Ref: CT083 Consists of nine taps & nine solid dies from 3mm to 12mm, a tap wrench and a die wrench. Price incl.VAT £12.25(€15.19)
		Quantity: OUT OF STOCK

		Ratchet tap wrench Ref: CT0831 Ratchet action tap wrench with forward, reverse and lock action. The bar may be slid either way or removed for use in a confined space. 4" (100mm) across the bar x 3¼" (85mm). Will take taps M3 to M8. Price incl.VAT £6.10(€7.56)
		Quantity: OUT OF STOCK

		Valve grinding tool (small) Ref: CT0832 Valve grinding tool with cup sizes 19mm and 22mm Price incl.VAT £0.99(€1.23)
		Quantity:

		Valve grinding tool (large) Ref: CT0833 Valve grinding tool with cup sizes 22mm and 32mm Price incl.VAT £1.10(€1.36)
		Quantity: OUT OF STOCK

		Magnetic tool holder Ref: CT084 Powerful 25lb magnet. Ideal for holding ferrous metal sheet at 90 or 45 degrees for welding, riveting, drilling etc. Price incl.VAT £3.05(€3.78)
		Quantity: OUT OF STOCK

		Mini magnetic tool holders (Pair) Ref: CT0841 Powerful magnets for holding ferrous metal sheets at 90 or 45 degrees for welding, riveting, drilling etc. Price incl.VAT £4.10(€5.08)
		Quantity:

		Professional diamond sharpening stone Ref: CT085 Extra fine diamond sharpening "stone". Actually all metal with a coating of industrial diamond grit. For sharpening tools, knives etc. Incredibly efficient. Price incl.VAT £10.25(€12.71)
		Quantity:

		Screwdriver bit set Ref: CT09 Chrome Vanadium nine piece 150mm long (6") screwdriver bit set. 3 Posidrive, 3 Crosspoint & 3 Flat point screwdriver bits. Price incl.VAT £6.10(€7.56)
		Quantity:

		Screwdriver bit set Ref: CT090 Double ended screwdriver bit set. 2 x No.1 cross point, 2 x No.2 cross point, a 5mm flat and a 6mm flat. The bits are 65mm long. Price incl.VAT £1.99(€2.47)
		Quantity:

		Precision screwdriver set Ref: CT091 11 piece set consisting of six flat-point screwdrivers, three crosspoint screwdrivers, a magnetic pick-up and a bradawl. Price incl.VAT £1.95(€2.42)
		Quantity:

		Pick-up tool with claw and magnetic head (24") Ref: CT101 600mm (24") flexible pick-up tool with two small built-in magnets and retractable claw. Picks up small tools, nuts, bolts etc from difficult to reach places. Price incl.VAT £1.95(€2.42)
		Quantity:

		Micrometer Ref: CT102 Precision micrometer 0 - 25mm x .01. Torqued adjusting knob. Price incl.VAT £5.50(€6.82)
		OUT OF STOCK

		Feeler gauges - Imperial Ref: CT1021 Imperial measurement feeler gauges. 0.0015 to 0.025 inch range in ten blades. Each blade is removable from the set. I plastic wallet. Price incl.VAT £3.75(€4.65)
		OUT OF STOCK

		Mechanic's stethoscope Ref: CT1022 This ingenious mechanic's stethoscope will help you locate that elusive knocking, grinding or squeaking. Amplifies sounds where you probe whilst cutting out general noise with the comfortable to wear ear pieces. The 110mm probe can be extended to 320mm with the extension provided. Price incl.VAT £9.65(€11.97)
		Quantity:

		Parts cleaning brush Ref: CT114 25mm diameter hard bristle head with a hard plastic non porous handle. The ideal brush for cleaning engine parts, and underbody nooks and crannies. Price incl.VAT £1.35(€1.67)
		Quantity: OUT OF STOCK

		Steel wire brush Ref: CT1141 165mm x 30mm hard non porous plastic with a convenient handle placed so that you can put maximum presure on the surface to be brushed. Price incl.VAT £1.35(€1.67)
		Quantity:

		Brass brush Ref: CT1142 Brass brush with stiff bristles. Price incl.VAT £2.00(€2.48)
		Quantity: OUT OF STOCK

		10M Extension cable Ref: CT1151 10M easy-to-use extension cable and cable tidy; the 13A exttension socket is very light and you don't have to put up with a heavy and bulky reel as you do with a wind-away type. A free cable tidy is included. Click here to see this cable on its tidy Price incl.VAT £9.95(€12.34)
		Quantity:

		Cable tidy Ref: CT11510 A sturdy plastic frame to wind away your cable with grips for the socket and plug ends. Can also be used to store your tow rope. Price incl.VAT £0.75(€0.93)
		Quantity:

		Four in line socket Ref: CT11513 This handy 4-in-line socket is made to be mounted on a flat surface such as a wall, the side of a desk, for computers, printers, desk lights etc., or the side or top of a work bench. The four fixing screw holes are on the surface of the unit and there is a seperate end cover to connect the cable. See enlarged image Price incl.VAT £1.99(€2.47)
		Quantity:

		Four in line socket extension cable Ref: CT11514 4-in-line socket with a 2.75M (9ft) extension cable and plug. Handy in the garage or the home. Price incl.VAT £2.99(€3.71)
		Quantity:

		2-core Curly cable Ref: CT1152 A useful extending cable which is approximately 1m (3' 3") at its shortest, extending to just over 4m (14') fully stretched. Each core is 0.5mm. Price incl.VAT £2.95(€3.66)
		Quantity:

		Inspection hand lamp Ref: CT1153 A versatile plastic hand lamp with a strong clamp which opens up to 55mm (2½") and which also swivels to position the light where you need it. It also has a hook at the top of the bulb cage to hang the lamp and a cable gland to secure the cable. This inspection lamp can be fitted with a 120/240 volt 60W (max) incandescent bulb, or a compact low wattage bulb. Sold without bulb, cable or plug. Price incl.VAT £1.99(€2.47)
		Quantity:

		13A three pin fused plug. Ref: CT1154 13 amp fused 3-pin plug. Price incl.VAT £0.60(€0.74)
		Quantity:

		Industrial long Rubber work gauntlets Ref: CT1210 Long red rubberised work gauntlets to protect your hands and forearms. As used on building sites, industrial workshops, gardening and almost any other mucky job. Price Pair (Incl VAT) £0.40(€0.50)
		Quantity:

		High visibility warning vest Ref: CT123 High visibility warning vest , Class 2 minimum areas of background and retroreflective material. Class 2 retroreflective material. Size available (for the moment) Large, to fit chest 40 - 44" (176/182cm). Please allow an extra 4" (10cm) to wear over heavy clothing. Certified No. 1159 of 12/2/2002. Notified Body No. 0319 Recommended to keep in your vehicle in case of a breakdown; it could save your life! Price incl.VAT £4.45(€5.52)
		Quantity: OUT OF STOCK

		Assorted hose clips Ref: CT132 10 hose clips. 2 each of: 10 - 13mm, 19 - 25mm, 25 - 32mm, 28 - 38mm, 38 - 55mm. A useful addition o any toolkit. Price incl.VAT £4.95(€6.14)
		Quantity: OUT OF STOCK

		Cable ties 200mm x 4.8mm Ref: CT133 20 cable ties 200mm (8") long Price incl.VAT £0.99(€1.23)
		Quantity:

		Cable ties 300mm x 4.8mm Ref: CT134 20 cable ties 300mm (12") long Price incl.VAT £1.75(€2.17)


		Cable ties 375mm x 4.8mm Ref: CT135 20 cable ties 375mm (15") long Price incl.VAT £1.95(€2.42)
		Quantity:

		Self-tapping screws Ref: CT136 10 stainless steel counter sunk self-tapping screws 20mm x 5mm Price incl.VAT £0.55(€0.68)
		Quantity:

		Butterfly screws Ref: CT1361 Useful for fixing a badge to the radiator, or fixing anything to a panel or grill where access to the nut is not possible or difficult. Price incl.VAT £0.55(€0.68)

classic-car-parts >