Straight connector with non-return valve for 3mm tubing £0.65 Place this connector valve between the pump and the washer jets to stop water running back into the reservoir. Prevents the pump running dry and allows instant water jet activity.
click here to find out more
|
Non-return valve for 3mm tubing £2.35 This high volume non return valve allows the full volume of water from the pump to reach the water jets.
click here to find out more
|
Power invertor 12VDC to 230 Volts AC 150W £22.99 Run your TV, laptop computer, electric razor or recharge mobile phones or tools etc in your car, caravan or boat. Plugs into the cigar socket and has a (UK type) 13 amp socket outlet for 230 volts ( normal mains voltage for the UK ), 150 watt continuous output. Short circuit and overload protected. Comforts of home on the move. Please check the power requirements of your appliance.
click here to find out more
|
Straight through connector for 3mm tubing
|
T piece with 4mm inlet & outlets £1.10 In order to maximise water flow and produce powerful jets of water to the screen, the inlet & outlets to this T piece are slightly larger than the usual 4mm inlet and 3mm outlets to the jets. 3mm tube can still be connected to the 4mm legs simply by warming the tube.
click here to find out more
|
Exterior mirror "Overtaker oblong" clamp-on £15.99 Exterior mirror: polished stainless steel head 115mm x 73mm with flat mirror. Polished stainless steel bracket including clamp screws; clamp-on "Overtaker". Quarter light fixing.This is a faithfull reproduction of the old "Stadium" model. Not handed.
click here to find out more | | 5.75" Reflector unit with side light holder & bulb and main H4 bulb £17.25 5.75" (146mm) takes the popular H4 twin filament Halogen bulb (included) and has a holder & bulb for use as a side/parking light. The convex lens has the required pattern for RHD (as in UK) and is "E" marked. The lens is moderately convex.
click here to find out more | | 12 volt x 21 watt halogen H3 bulb |
|
Klaxon 12v period horn with chrome trumpet £48.99 This klaxon horn with chrome trumpet recreates the genuine old OOO-GAAHH sound. Polished metal body and a substanstial plasticchrome horn. It is 235mm x 120mm overall, and the horn section 120mm x 77mm diameter. 12volt 2-terminal connection. Requires a single 6.5mm hole to fix and the bolt included.
click here to find out more | | Chrome plated country designation letters. (GB plate) 3¼" (84mm) high. £7.75 Chrome plated on alloy GB letters. Reproduction of the old "Desmo" item. Self-adhesive screwless fixing. Each letter is approximately 3¼" x 21/8" (84x53mm)
click here to find out more | | 4" exterior mirror with curved arm. Clamp fit. £17.50 Exterior mirror: polished stainless steel head 102mm (4") diameter with flat mirror. Beautiful curved polished chrome arm; clamp-on fitting including grub screws. Left or right hand fitting.
click here to find out more |
|
Exterior Chrome Mirror ("Ital" style) £15.95 Exterior wing mirror: diecast chrome arm/bright stainless steel head; including mounting gasket and fixing bolt. "Ital" style 115mm round head with convex mirror. 90mm x 30mm base incl. Gasket. It is fixed by a single 6mm bolt and a 5mm location pin, 28mm apart. Not Handed.
click here to find out more | | Interior mirror all black suction cup fitting £3.95 Interior mirror with black plastic head and stem; fixes directly to the windscreen with a powerful suction cup. 120mm x 55mm.
click here to find out more | | Exterior Mirror with long base ("USA" style) £16.95 Exterior mirror: die cast chrome arm/bright stainless steel head; "USA" style. The mirror head is 4¼" (105mm) Ø with a flat mirror. The base is 165mm x 37mm (6½" x 1½") and the fixing screw holes approximately 100mm (4") apart. It is fixed from the outside by two self-tapping screws. This mirror can be used on the left or right hand of the car, and mounted as a door or wing mirror. Now complete with pre-formed black gasket.
click here to find out more |
|
Stainless steel headlamp visor (Pair) £10.99 Visor for 7" headlamps beautifully finished in polished stainless steel. They are 80mm (approx.3") deep x 270mm long and finished with a fully rolled edge. Pair. Please click on the image to see larger picture.click here to find out more | | Badge bar clip in polished stainless steel £3.25 Polished stainless steel badge bar clip including stainless steel bolts and nuts. 38mm long, it is designed for 20mm (3/4") badge bars. The bolts are located in slotted holes to accomodate badges with fixing hole centres 12mm to 22mm.
click here to find out more | | Klaxon 12v period horn with red trumpet £29.55 The klaxon horn recreates the genuine old OOO-GAAHH sound. High grade plastic construction it is 225mm x 110mm overall, and the horn section 125mm x 90mm diameter. 12volt 2-terminal connection. Requires a single 6.5mm hole to fix. Bolt included. Sorry! Out of stock. New consignment arriving very shortly.click here to find out more |
|
